7 Basic Steps in Raising the Mainsail of a Sailboat For a Smooth Sailing Experience

To properly raise a sailboat’s mainsail, one should be able to do the following: familiarize the parts of the sailboat; locate all the sail sheets; point the boat into the direction of the wind; release the vang sheet and other supporting parts; announce when the sail is already raised; hoist the mainsail; and; make a final check on the mainsail for creases and luffs.

It is important to master the task of raising the sailboat’s mainsail properly. Once the mainsail is properly raised, your sailboat’s speed capacity can be maximized. Below are the easy procedure of properly raising the mainsail for a smooth and fast sailing:

Familiarize the parts of the sailboat

Always make sure that you know or at least familiar with the sailboat’s rigging mechanism. Know the important parts of the mainsail to effectively locate where the shackle and clew can be found. This is to make sure that you can properly attached all the supporting parts together before releasing the mainsail.

Locate all the sail sheets

Find all the sheets of the mainsail. Ensure that the sheets are complete for every sail. Also, locate the boat rope and halyard to easily prepare the sail for hoisting and decreasing or increasing the luff.

Point the boat into the wind direction

Point the boat in a direction where the wind directly blows over the sailboat’s bow. Before releasing the sail check if the wind indicator located on the boat’s mainmast is pointing forward. By doing this, raising the sail will be easier since the boat’s movement is minimized.

Release the vang sheet and other supporting parts

Release the vang that hold’s down the boom closer to the deck. This will make raising the sail easier. Also release the cunningham which pulls the sail downward the mast.

Announce when the sail is already raised

Always let everyone know that you are raising the sail. This is to ensure safety and to avoid any accidents while raising the sail. Remind the people in the sailboat to move away from the boom while the sail is being raise.

Hoist the mainsail

Confirm if everybody is on their position before giving the signal of raising the mainsail. Use a crank to pull the haylard for larger sailboats, while a cleat can be used in pulling the halyard for smaller boats. Slowly hoist the mainsail and check the sail slugs every time it is hard to hoist the sail. Ensure that the haylard is not jammed with anything and slowly pull it downward until the luff is tightened.

Make a final check on the mainsail for creases and luffs

Keep on raising the sail until its tip reaches the mast. Check for creases and luffs and fix it to properly unroll the sail. When the mainsail is properly hoisted, the halyard can already be cleated off. You can now start the boat to sail away.

Always follow the directions carefully,especially when hoisting the mainsail. Following these simple procedures will help you get ready for a smooth sailing journey.

Boat Repairs – Some Basic Tips to Get the Job Done

Safe sailing is what boat owners want whenever they have fun in the sea. But there are times when dangers and troubles may happen if the boat is not in good shape due to unrepaired or unmaintained parts. It is important to always do some inspection on a regular basis and before bringing your boat to sail. Routine inspection and off-season maintenance schedules will be a great move to keep your sailing during summer time more enjoyable instead of spending your time just fixing the boat in the middle of the water.

There should always be a budget for repairs and maintenance of boat because these really cost a lot. Maintenance alone would cost much, especially if you will avail the service from boat maintenance service providers. Boat repairs also cost a bit high since repairing a boat would mean some parts are required to be changed. You will have to buy parts to replace broken ones. You will also pay for the labor charges from skilled boat repair men.

Some of the parts of the boat need regular change or repair while some parts can last longer if maintained well. Boat repairs, replacement of boat parts, boat maintenance, and the costs it would take depend on the type of boat.  

If you own a boat, it would be a wise move if you will get some knowledge on how to get the job done by yourself. There are manuals provided when you buy a boat. This will guide you through the simple tasks of maintaining or even repairing your boat. Some guidelines and help instructions are also available on the net. Knowing how to do the repairs and maintenance by yourself would enable you to save on expenses. It would also save you from boat and sailing related problems in case the boat malfunctions while you are in the middle of the sea. If there are major repairs that you think you can’t handle, might as well ask for assistance from your boat provider or from some certified and qualified boat repair shops.

Boat repair firms are available everywhere and on the internet. They usually provide assistance from simple boat repair and maintenance to major repair of engine, water pump, and other items. They also provide services like painting of aluminum boats or gel-coating of fiberglass boats. Boat repair firms usually handle all types of boat repairs and maintenance, including restructuring parts of inflatable boats that were damaged due to accidents or other incidents. But before you hire someone to repair your boat, make sure that the firm is highly recommended, not only by your friends, but by other customers as well. Check the feed back or negative claims if there is any. Efficiency and quality customer service should be expected from the boat repair firms and their technicians.

Giving your boat the best boat repairs it needs, whether the service is from trusted boat repair firms or from your own skilled hands and minds, will keep you safe and risk-free as you enjoy every boat sail. In addition to that, maintenance and quality boat repairs will also preserve the life of your boat.